Glossary

JavaScript

Angular has its own vocabulary. Most Angular terms are common English words with a specific meaning within the Angular system.

This glossary lists the most prominent terms and a few less familiar ones that have unusual or unexpected definitions.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Ahead-of-time (AOT) compilation

You can compile Angular applications at build time. By compiling your application using the compiler-cli, ngc, you can bootstrap directly to a module factory, meaning you don't need to include the Angular compiler in your JavaScript bundle. Ahead-of-time compiled applications also benefit from decreased load time and increased performance.

Attribute directives

A category of directive that can listen to and modify the behavior of other HTML elements, attributes, properties, and components. They are usually represented as HTML attributes, hence the name.

For example, you can use the ngClass directive to add and remove CSS class names.

Learn about them in the Attribute Directives guide.

Binding

Usually refers to data binding and the act of binding an HTML object property to a data object property.

Sometimes refers to a dependency-injection binding between a "token"—also referred to as a "key"—and a dependency provider. When using this more rare usage, be clear in context.

Bootstrap

You launch an Angular application by "bootstrapping" it using the application root Angular module (AppModule). Bootstrapping identifies an application's top level "root" component, which is the first component that is loaded for the application. For more information, see the Setup page.

You can bootstrap multiple apps in the same index.html, each app with its own top-level root.

camelCase

The practice of writing compound words or phrases such that each word or abbreviation begins with a capital letter except the first letter, which is lowercase.

Function, property, and method names are typically spelled in camelCase. For example, square, firstName, and getHeroes. Notice that square is an example of how you write a single word in camelCase.

camelCase is also known as lower camel case to distinguish it from upper camel case, or PascalCase. In Angular documentation, "camelCase" always means lower camel case.

Component

An Angular class responsible for exposing data to a view and handling most of the view’s display and user-interaction logic.

The component is one of the most important building blocks in the Angular system. It is, in fact, an Angular directive with a companion template.

Apply the Component decorator to the component class, thereby attaching to the class the essential component metadata that Angular needs to create a component instance and render the component with its template as a view.

Those familiar with "MVC" and "MVVM" patterns will recognize the component in the role of "controller" or "view model".

dash-case

The practice of writing compound words or phrases such that each word is separated by a dash or hyphen (-). This form is also known as kebab-case.

Directive selectors (like my-app) and the root of filenames (such as hero-list.component.ts) are often spelled in dash-case.

Data binding

Applications display data values to a user and respond to user actions (such as clicks, touches, and keystrokes).

In data binding, you declare the relationship between an HTML widget and data source and let the framework handle the details. Data binding is an alternative to manually pushing application data values into HTML, attaching event listeners, pulling changed values from the screen, and updating application data values.

Angular has a rich data-binding framework with a variety of data-binding operations and supporting declaration syntax.

Read about the following forms of binding in the Template Syntax page:

Dependency injection

A design pattern and mechanism for creating and delivering parts of an application to other parts of an application that request them.

Angular developers prefer to build applications by defining many simple parts that each do one thing well and then wiring them together at runtime.

These parts often rely on other parts. An Angular component part might rely on a service part to get data or perform a calculation. When part "A" relies on another part "B," you say that "A" depends on "B" and that "B" is a dependency of "A."

You can ask a "dependency injection system" to create "A" for us and handle all the dependencies. If "A" needs "B" and "B" needs "C," the system resolves that chain of dependencies and returns a fully prepared instance of "A."

Angular provides and relies upon its own sophisticated dependency-injection system to assemble and run applications by "injecting" application parts into other application parts where and when needed.

At the core, an injector returns dependency values on request. The expression injector.get(token) returns the value associated with the given token.

A token is an Angular type (OpaqueToken). You rarely need to work with tokens directly; most methods accept a class name (Foo) or a string ("foo") and Angular converts it to a token. When you write injector.get(Foo), the injector returns the value associated with the token for the Foo class, typically an instance of Foo itself.

During many of its operations, Angular makes similar requests internally, such as when it creates a component for display.

The Injector maintains an internal map of tokens to dependency values. If the Injector can't find a value for a given token, it creates a new value using a Provider for that token.

A provider is a recipe for creating new instances of a dependency value associated with a particular token.

An injector can only create a value for a given token if it has a provider for that token in its internal provider registry. Registering providers is a critical preparatory step.

Angular registers some of its own providers with every injector. You can register your own providers.

Read more in the Dependency Injection page.

Directive

An Angular class responsible for creating, reshaping, and interacting with HTML elements in the browser DOM. The directive is Angular's most fundamental feature.

A directive is ususally associated with an HTML element or attribute. This element or attribute is often referred to as the directive itself.

When Angular finds a directive in an HTML template, it creates the matching directive class instance and gives the instance control over that portion of the browser DOM.

You can invent custom HTML markup (for example, <my-directive>) to associate with your custom directives. You add this custom markup to HTML templates as if you were writing native HTML. In this way, directives become extensions of HTML itself.

Directives fall into one of the following categories:

ECMAScript

The official JavaScript language specification.

The latest approved version of JavaScript is ECMAScript 2016 (also known as "ES2016" or "ES7"). Many Angular developers write their applications in ES7 or a dialect that strives to be compatible with it, such as TypeScript.

Most modern browsers only support the much older "ECMAScript 5" (also known as "ES5") standard. Applications written in ES2016, ES2015, or one of their dialects must be transpiled to ES5 JavaScript.

Angular developers can write in ES5 directly.

ES2015

Short hand for ECMAScript 2015.

ES5

Short hand for ECMAScript 5, the version of JavaScript run by most modern browsers.

ES6

Short hand for ECMAScript 2015.

Injector

An object in the Angular dependency-injection system that can find a named dependency in its cache or create a dependency with a registered provider.

Input

A directive property that can be the target of a property binding (explained in detail in the Template Syntax page). Data values flow into this property from the data source identified in the template expression to the right of the equal sign.

See the Input and output properties section of the Template Syntax page.

Interpolation

A form of property data binding in which a template expression between double-curly braces renders as text. That text may be concatenated with neighboring text before it is assigned to an element property or displayed between element tags, as in this example.

Read more about interpolation in the Template Syntax page.

Just-in-time (JIT) compilation

A bootstrapping method of compiling components and modules in the browser and launching the application dynamically. Just-in-time mode is a good choice during development. Consider using the ahead-of-time mode for production apps.

kebab-case

See dash-case.

Lifecycle hooks

Directives and components have a lifecycle managed by Angular as it creates, updates, and destroys them.

You can tap into key moments in that lifecycle by implementing one or more of the lifecycle hook interfaces.

Each interface has a single hook method whose name is the interface name prefixed with ng. For example, the OnInit interface has a hook method named ngOnInit.

Angular calls these hook methods in the following order:

Read more in the Lifecycle Hooks page.

Module

Angular has the following types of modules:

A cohesive block of code dedicated to a single purpose.

Angular apps are modular.

In general, you assemble an application from many modules, both the ones you write and the ones you acquire from others.

A module exports something of value in that code, typically one thing such as a class; a module that needs that class imports it.

The structure of Angular modules and the import/export syntax is based on the ES2015 module standard.

An application that adheres to this standard requires a module loader to load modules on request and resolve inter-module dependencies. Angular doesn't include a module loader and doesn't have a preference for any particular third-party library (although most examples use SystemJS). You can use any module library that conforms to the standard.

Modules are typically named after the file in which the exported thing is defined. The Angular DatePipe class belongs to a feature module named date_pipe in the file date_pipe.ts.

You rarely access Angular feature modules directly. You usually import them from an Angular scoped package such as @angular/core.

Output

A directive property that can be the target of event binding (read more in the event binding section of the Template Syntax page). Events stream out of this property to the receiver identified in the template expression to the right of the equal sign.

See the Input and output properties section of the Template Syntax page.

PascalCase

The practice of writing individual words, compound words, or phrases such that each word or abbreviation begins with a capital letter. Class names are typically spelled in PascalCase. For example, Person and HeroDetailComponent.

This form is also known as upper camel case to distinguish it from lower camel case or simply camelCase. In this documentation, "PascalCase" means upper camel case and "camelCase" means lower camel case.

Pipe

An Angular pipe is a function that transforms input values to output values for display in a view. Here's an example that uses the built-in currency pipe to display a numeric value in the local currency.

{{product.price | currency}}

You can also write your own custom pipes. Read more in the page on pipes.

Provider

A provider creates a new instance of a dependency for the dependency injection system. It relates a lookup token to code—sometimes called a "recipe"—that can create a dependency value.

Router

Most applications consist of many screens or views. The user navigates among them by clicking links and buttons, and performing other similar actions that cause the application to replace one view with another.

The Angular component router is a richly featured mechanism for configuring and managing the entire view navigation process, including the creation and destruction of views.

Routing component

An Angular component with a RouterOutlet that displays views based on router navigations.

For more information, see the Routing & Navigation page.

Service

For data or logic that is not associated with a specific view or that you want to share across components, build services.

Applications often require services such as a hero data service or a logging service.

A service is a class with a focused purpose. You often create a service to implement features that are independent from any specific view, provide shared data or logic across components, or encapsulate external interactions.

Applications often require services such as a data service or a logging service.

For more information, see the Services page of the Tour of Heroes tutorial.

snake_case

The practice of writing compound words or phrases such that an underscore (_) separates one word from the next. This form is also known as underscore case.

Structural directives

A category of directive that can shape or reshape HTML layout, typically by adding and removing elements in the DOM. The ngIf "conditional element" directive and the ngFor "repeater" directive are well-known examples.

Read more in the Structural Directives guide.

Template

A chunk of HTML that Angular uses to render a view with the support and guidance of an Angular directive, most notably a component.

Template expression

A TypeScript-like syntax that Angular evaluates within a data binding.

Read about how to write template expressions in the Template expressions section of the Template Syntax page.

Transpile

The process of transforming code written in one form of JavaScript (such as TypeScript) into another form of JavaScript (such as ES5).

TypeScript

A version of JavaScript that supports most ECMAScript 2015 language features such as decorators.

TypeScript is also notable for its optional typing system, which provides compile-time type checking and strong tooling support (such as "intellisense," code completion, refactoring, and intelligent search). Many code editors and IDEs support TypeScript either natively or with plugins.

TypeScript is the preferred language for Angular development, although you can use other JavaScript dialects such as ES5.

Read more about TypeScript at typescriptlang.org.

View

A portion of the screen that displays information and responds to user actions such as clicks, mouse moves, and keystrokes.

Angular renders a view under the control of one or more directives, especially component directives and their companion templates. The component plays such a prominent role that it's often convenient to refer to a component as a view.

Views often contain other views. Any view might be loaded and unloaded dynamically as the user navigates through the application, typically under the control of a router.

Zone

A mechanism for encapsulating and intercepting a JavaScript application's asynchronous activity.

The browser DOM and JavaScript have a limited number of asynchronous activities, such as DOM events (for example, clicks), promises, and XHR calls to remote servers.

Zones intercept all of these activities and give a "zone client" the opportunity to take action before and after the async activity finishes.

Angular runs your application in a zone where it can respond to asynchronous events by checking for data changes and updating the information it displays via data bindings.

Learn more about zones in this Brian Ford video.