Structural Directives

This guide looks at how Angular manipulates the DOM with structural directives and how you can write your own structural directives to do the same thing.

Table of contents

• What are structural directives?
• NgIf case study
• The asterisk (*) prefix
• Inside NgFor
  • microsyntax
  • template input variables
  • one structural directive per element
• Inside the NgSwitch directives
• Prefer the (*) prefix
• The <template> element
• Group sibling elements with <ng-container>
• Write a structural directive

Try the .

What are structural directives?

Structural directives are responsible for HTML layout. They shape or reshape the DOM's structure, typically by adding, removing, or manipulating elements.

As with other directives, you apply a structural directive to a host element. The directive then does whatever it's supposed to do with that host element and its descendents.

Structural directives are easy to recognize. An asterisk (*) precedes the directive attribute name as in this example.

No brackets. No parentheses. Just *ngIf set to a string.

You'll learn in this guide that the asterisk (*) is a convenience notation and the string is a microsyntax rather than the usual template expression. Angular desugars this notation into a marked-up <template> that surrounds the host element and its descendents. Each structural directive does something different with that template.

Three of the common, built-in structural directives—NgIf, NgFor, and NgSwitch...—are described in the Template Syntax guide and seen in samples throughout the Angular documentation. Here's an example of them in a template:

This guide won't repeat how to use them. But it does explain how they work and how to write your own structural directive.

NgIf case study

NgIf is the simplest structural directive and the easiest to understand. It takes a boolean expression and makes an entire chunk of the DOM appear or disappear.

The ngIf directive doesn't hide elements with CSS. It adds and removes them physically from the DOM. Confirm that fact using browser developer tools to inspect the DOM.

The top paragraph is in the DOM. The bottom, disused paragraph is not; in its place is a comment about "template bindings" (more about that later).

When the condition is false, NgIf removes its host element from the DOM, detaches it from DOM events (the attachments that it made), detaches the component from Angular change detection, and destroys it. The component and DOM nodes can be garbage-collected and free up memory.

Why remove rather than hide?

A directive could hide the unwanted paragraph instead by setting its display style to none.

While invisible, the element remains in the DOM.

The difference between hiding and removing doesn't matter for a simple paragraph. It does matter when the host element is attached to a resource intensive component. Such a component's behavior continues even when hidden. The component stays attached to its DOM element. It keeps listening to events. Angular keeps checking for changes that could affect data bindings. Whatever the component was doing, it keeps doing.

Although invisible, the component—and all of its descendant components—tie up resources. The performance and memory burden can be substantial, responsiveness can degrade, and the user sees nothing.

On the positive side, showing the element again is quick. The component's previous state is preserved and ready to display. The component doesn't re-initialize—an operation that could be expensive. So hiding and showing is sometimes the right thing to do.

But in the absence of a compelling reason to keep them around, your preference should be to remove DOM elements that the user can't see and recover the unused resources with a structural directive like NgIf .

These same considerations apply to every structural directive, whether built-in or custom. Before applying a structural directive, you might want to pause for a moment to consider the consequences of adding and removing elements and of creating and destroying components.

The asterisk (*) prefix

Surely you noticed the asterisk (*) prefix to the directive name and wondered why it is necessary and what it does.

Here is *ngIf displaying the hero's name if hero exists.

The asterisk is "syntactic sugar" for something a bit more complicated. Internally, Angular desugars it in two stages. First, it translates the *ngIf="..." into a template attribute, template="ngIf ...",  like this.

Then it translates the template attribute into a template element, wrapped around the host element, like this.

• The *ngIf directive moved to the <template> element where it became a property binding,[ngIf].
• The rest of the <div>, including its class attribute, moved inside the <template> element.

None of these forms are actually rendered. Only the finished product ends up in the DOM.

Angular consumed the <template> content during its actual rendering and replaced the <template> with a diagnostic comment.

The NgFor and NgSwitch... directives follow the same pattern.

Inside *ngFor

Angular transforms the *ngFor in similar fashion from asterisk (*) syntax through template attribute to template element.

Here's a full-featured application of NgFor, written all three ways:

This is manifestly more complicated than ngIf and rightly so. The NgFor directive has more features, both required and optional, than the NgIf shown in this guide. At minimum NgFor needs a looping variable (let hero) and a list (heroes).

You enable these features in the string assigned to ngFor, which you write in Angular's microsyntax.

Microsyntax

The Angular microsyntax lets you configure a directive in a compact, friendly string. The microsyntax parser translates that string into attributes on the <template>:

• The let keyword declares a template input variable that you reference within the template. The input variables in this example are hero, i, and odd. The parser translates let hero, let i, and let odd into variables named, let-hero, let-i, and let-odd.

• The microsyntax parser takes of and trackby, title-cases them (of -> Of, trackBy -> TrackBy), and prefixes them with the directive's attribute name (ngFor), yielding the names ngForOf and ngForTrackBy. Those are the names of two NgFor input properties . That's how the directive learns that the list is heroes and the track-by function is trackById.

• As the NgFor directive loops through the list, it sets and resets properties of its own context object. These properties include index and odd and a special property named $implicit.

• The let-i and let-odd variables were defined as let i=index and let odd=odd. Angular sets them to the current value of the context's index and odd properties.

• The context property for let-hero wasn't specified. It's intended source is implicit. Angular sets let-hero to the value of the context's $implicit property which NgFor has initialized with the hero for the current iteration.

• The API guide describes additional NgFor directive properties and context properties.

These microsyntax mechanisms are available to you when you write your own structural directives. Studying the source code for NgIf and NgFor is a great way to learn more.

Template input variable

A template input variable is a variable whose value you can reference within a single instance of the template. There are several such variables in this example: hero, i, and odd. All are preceded by the keyword let.

A template input variable is not the same as a template reference variable, neither semantically nor syntactically.

You declare a template input variable using the let keyword (let hero). The variable's scope is limited to a single instance of the repeated template. You can use the same variable name again in the definition of other structural directives.

You declare a template reference variable by prefixing the variable name with # (#var). A reference variable refers to its attached element, component or directive. It can be accessed anywhere in the entire template.

Template input and reference variable names have their own namespaces. The hero in let hero is never the same variable as the hero declared as #hero.

One structural directive per host element

Someday you'll want to repeat a block of HTML but only when a particular condition is true. You'll try to put both an *ngFor and an *ngIf on the same host element. Angular won't let you. You may apply only one structural directive to an element.

The reason is simplicity. Structural directives can do complex things with the host element and its descendents. When two directives lay claim to the same host element, which one takes precedence? Which should go first, the NgIf or the NgFor? Can the NgIf cancel the effect of the NgFor? If so (and it seems like it should be so), how should Angular generalize the ability to cancel for other structural directives?

There are no easy answers to these questions. Prohibiting multiple structural directives makes them moot. There's an easy solution for this use case: put the *ngIf on a container element that wraps the *ngFor element. One or both elements can be an ng-container so you don't have to introduce extra levels of HTML.

Inside NgSwitch directives

The Angular NgSwitch is actually a set of cooperating directives: NgSwitch, NgSwitchCase, and NgSwitchDefault.

Here's an example.

The switch value assigned to NgSwitch (hero.emotion) determines which (if any) of the switch cases are displayed.

NgSwitch itself is not a structural directive. It's an attribute directive that controls the behavior of the other two switch directives. That's why you write [ngSwitch], never *ngSwitch.

NgSwitchCase and NgSwitchDefault are structural directives. You attach them to elements using the asterisk (*) prefix notation. An NgSwitchCase displays its host element when its value matches the switch value. The NgSwitchDefault displays its host element when no sibling NgSwitchCase matches the switch value.

As with other structural directives, the NgSwitchCase and NgSwitchDefault can be desugared into the template attribute form.

That, in turn, can be desugared into the <template> element form.

Prefer the asterisk (*) syntax.

The asterisk (*) syntax is more clear than the other desugared forms. Use <ng-container> when there's no single element to host the directive.

While there's rarely a good reason to apply a structural directive in template attribute or element form, it's still important to know that Angular creates a <template> and to understand how it works. You'll refer to the <template> when you write your own structural directive.

The <template>

The HTML 5 <template> is a formula for rendering HTML. It is never displayed directly. In fact, before rendering the view, Angular replaces the <template> and its contents with a comment.

If there is no structural directive and you merely wrap some elements in a <template>, those elements disappear. That's the fate of the middle "Hip!" in the phrase "Hip! Hip! Hooray!".

Angular erases the middle "Hip!", leaving the cheer a bit less enthusiastic.

A structural directive puts a <template> to work as you'll see when you write your own structural directive.

Group sibling elements with <ng-container>

There's often a root element that can and should host the structural directive. The list element (<li>) is a typical host element of an NgFor repeater.

When there isn't a host element, you can usually wrap the content in a native HTML container element, such as a <div>, and attach the directive to that wrapper.

Introducing another container element—typically a <span> or <div>—to group the elements under a single root is usually harmless. Usually ... but not always.

The grouping element may break the template appearance because CSS styles neither expect nor accommodate the new layout. For example, suppose you have the following paragraph layout.

You also have a CSS style rule that happens to apply to a <span> within a <p>aragraph.

The constructed paragraph renders strangely.

The p span style, intended for use elsewhere, was inadvertently applied here.

Another problem: some HTML elements require all immediate children to be of a specific type. For example, the <select> element requires <option> children. You can't wrap the options in a conditional <div> or a <span>.

When you try this,

the drop down is empty.

The browser won't display an <option> within a <span>.

<ng-container> to the rescue

The Angular <ng-container> is a grouping element that doesn't interfere with styles or layout because Angular doesn't put it in the DOM.

Here's the conditional paragraph again, this time using <ng-container>.

It renders properly.

Now conditionally exclude a select <option> with <ng-container>.

The drop down works properly.

The <ng-container> is a syntax element recognized by the Angular parser. It's not a directive, component, class, or interface. It's more like the curly braces in a JavaScript if-block:

Without those braces, JavaScript would only execute the first statement when you intend to conditionally execute all of them as a single block. The <ng-container> satisfies a similar need in Angular templates.

Write a structural directive

In this section, you write an UnlessDirective structural directive that does the opposite of NgIf. NgIf displays the template content when the condition is true. UnlessDirective displays the content when the condition is false.

Creating a directive is similar to creating a component.

• Import the Directive decorator (instead of the Component decorator).

• Import the Input, TemplateRef, and ViewContainerRef symbols; you'll need them for any structural directive.

• Apply the decorator to the directive class.

• Set the CSS attribute selector that identifies the directive when applied to an element in a template.

Here's how you might begin:

The directive's selector is typically the directive's attribute name in square brackets, [myUnless]. The brackets define a CSS attribute selector.

The directive attribute name should be spelled in lowerCamelCase and begin with a prefix. Don't use ng. That prefix belongs to Angular. Pick something short that fits you or your company. In this example, the prefix is my.

The directive class name ends in Directive per the style guide. Angular's own directives do not.

TemplateRef and ViewContainerRef

A simple structural directive like this one creates an embedded view from the Angular-generated <template> and inserts that view in a view container adjacent to the directive's original <p> host element.

You'll acquire the <template> contents with a TemplateRef and access the view container through a ViewContainerRef.

You inject both in the directive constructor as private variables of the class.

The myUnless property

The directive consumer expects to bind a true/false condition to [myUnless]. That means the directive needs a myUnless property, decorated with @Input

Angular sets the myUnless property whenever the value of the condition changes. Because the myUnless property does work, it needs a setter.

• If the condition is falsy and the view hasn't been created previously, tell the view container to create the embedded view from the template.

• If the condition is truthy and the view is currently displayed, clear the container which also destroys the view.

Nobody reads the myUnless property so it doesn't need a getter.

The completed directive code looks like this:

Add this directive to the declarations array of the AppModule.

Then create some HTML to try it.

When the condition is falsy, the top (A) paragraph appears and the bottom (B) paragraph disappears. When the condition is truthy, the top (A) paragraph is removed and the bottom (B) paragraph appears.

Summary

You can both try and download the source code for this guide in the .

Here is the source from the src/app/ folder.

You learned

• that structural directives manipulate HTML layout.
• to use <ng-container> as a grouping element when there is no suitable host element.
• that the Angular desugars asterisk (*) syntax into a <template>.
• how that works for the NgIf, NgFor and NgSwitch built-in directives.
• about the microsyntax that expands into a <template>.
• to write a custom structural directive, UnlessDirective.